Reacting to a Abrupt Hot Water System Shutdown: Pro Advice
Reacting to a Abrupt Hot Water System Shutdown: Pro Advice
Blog Article
Just how do you feel with regards to What Would Cause My Electric Water Heater to Stop Working??
Many modern-day homes use an electrical water heater for their furnace, as a result of its ease as well as ease of use. However, just like any other electric appliances, problems might occur with its use, suddenly. It can be actually discouraging to wake up to a chilly shower as opposed to a hot one or having your bath with water that isn't warm enough or even also hot. Whatever the situation might be, hot water heater troubles can be rather nerve-racking. Luckily, we've made a list of feasible remedies to your hot water heater problems. There are a variety of variables that can trigger much of these problems, maybe a concern with the power supply, the electric burner, or the thermostat. Prior to doing anything, guarantee you shut off the primary power supply for safety. Whatever the problem is, getting it repaired should not pose way too much of a concern if you comply with these steps:
Call A Specialist:
If after changing all defective components as well as resetting your temperature, the hot water heater still isn't working, you might need to speak to a professional plumber for a professional viewpoint. The problem with your heating unit could be that the hot and cold taps have actually been switched or it may be undersized for the quantity of hot water needed in your house. Whatever the situation might be, a specialist plumber would aid address the problem.
Inspect Your Power Supply:
As standard as this might seem, it is very needed. Without sufficient power, your hot water heater will not work. So the first thing to do when your water all of a sudden stops working is to verify that it isn't a power problem. Examine if the fuse is burnt out or the circuit breaker tripped. If the breaker is the concern, simply turn it off and on once more. Replace any type of damaged or damaged fuse. Examine the appliance with power after these modifications to see if it's currently working.
Inspect Your Thermostat:
If your water heater still isn't working or the water appearing isn't hot enough, you may need to check the temperature settings on your top thermostat. Guarantee the circuit breaker is switched off before doing anything. Open the gain access to panel and press the red switch for temperature level reset above the thermostat. This need to help heat the water. Transform the circuit breaker back on as well as inspect if the issue has been solved.
Inspect the Burner in the Water Heater:
If it's not a power trouble, then attempt taking a look at your heating element if it is still working. Examine each of your heating elements to ensure the issue isn't with any of them. If any one of them is malfunctioning, replace that part and afterwards inspect whether the warm water is back on.
Verdict
Water heater issues are not always significant. Many of them are because of small concerns like a blown fuse or damaged burner. Changing the malfunctioning components ought to work. However, if you are still unable to address the issue, give a call to your closest plumber to come to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We hope you liked our excerpt on How to Troubleshoot and Repair an Electric Water Heater. Thank you so much for finding the time to read through our piece. For those who appreciated our post plz remember to pass it around. We truly appreciate reading our article about How to Troubleshoot and Repair an Electric Water Heater.
Book Your Installation Report this page